Relief System Design Training Course

Register Me Now

Course Description:

Smith & Burgess’ Relief System Design Course provides students an in-depth overview of pressure relief system design, their requirements, and current industry-related topics. Students will also learn the guiding principals for evaluating a relief system, as well as, determining the applicability of overpressure scenarios, required relief rates, and relief device capacity. In addition, the course provides relevant updates regarding industry guidelines and standards.  (A background in engineering and process safety is helpful but not required.)

Duration:

2.5 Days: Relief Systems Design Course

0.5 Day: Salus Fundamentals (Free & Optional Attendance)

Dates:

  • Tuesday, October 1st  |  8:00 am - 5:00 pm
  • Wednesday, October 2nd  |  8:00 am - 5:00 pm
  • Thursday, October 3rd  |  8:00 am - 12:00 pm
    • (Salus Fundamentals Course  | 1:00 pm - 5:00pm)

Location:

Smith & Burgess' Houston Office:

3rd Floor Conference Room
7600 W. Tidwell Rd.
Houston, TX 77040

Credits:

Upon completion, all participants will receive 17 hours of Professional Development. (21 hours if attended the .5 day Salus Fundamental Course.) 

Objective:

Develop an understanding of the importance of pressure relief systems and key principles impacting their design. Become familiar with the codes and standards relevant to Process Safety Management (PSM).

Target Audience:

Engineers and others responsible for PSM, who need to perform, apply, or understand pressure relief system requirements.

Course Topics:

  • Introduction to Pressure Relief Valve Design & Operation
  • Codes & Standards
  • Overpressure Scenarios
  • Required Relief Rates
  • Relief Device Types, Sizing & Selection
  • Rupture Disks/Other Devices
  • Overpressure Protection of Atmospheric & Low-Pressure Storage Tanks
  • Overview of Relief Disposal Systems
  • Network Equipment Analysis

Some of the specific topics included in this training course are:

  • Appendix M requirements for isolation valves
  • Effects of back pressure on relief valves
  • Evaluating gas breakthrough

This course is based on the latest editions of the following industry standards:

  • API 520 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries
  • API 521 Guide for Pressure-Relieving and Depressuring Systems
  • API 526 Flanged Steel Pressure Relief Valves
  • API 2000 Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated and Refrigerated
  • ASME Boiler and Pressure Vessel Code, Section I and Section VIII, Div. 1

Tuition / Discounts:

The cost of the 3-day Relief Systems Design Training Course is $1,550 per student. This includes the course manual, supplies, breakfast/lunches, the free “Salus Fundamentals” training course, as well as, 17 hours of professional development hours (21 hours if you attend the Salus Fundamentals Course on Thursday afternoon.)

(If your organization registers 3+ students, Smith & Burgess will knock $100 off each student's tuition cost.)

Register Me Now